What is the correct riding method for ATV drivers


For first-time drivers, they must first understand the […]

For first-time drivers, they must first understand the ATV brakes, accelerators, gears, clutch positions and operating strengths to be driven. At the same time, check whether the tire screws are loose, whether the wheels are loose and skewed;All-terrain utility Carrier  whether the tire pressure is appropriate.

Necessary safety inspections should be carried out each time before leaving the vehicle to ensure that all parts are flexible and effective.

The safety equipment that needs to be equipped before riding, helmets and protective clothing are indispensable. As there are many versions of ATV, different versions also have different protection measures.

Master the correct driving posture. Step on the pedals with your toes forward, and your knees clamp the fuel tank; palms down, lightly hold the handlebars as if you are pushing forward; relax your whole body naturally and look forward. Always pay attention to the conditions of the road ahead.


At low speed, cut the direction handle to the direction you want to turn, lean your upper body slightly forward, step on your feet firmly, place your weight on the outer pedals, balance your upper body, and keep the accelerator at a constant speed. At high speed, the basic operation is the same as turning at low speed. The difference is that in order to achieve balance and greater centrifugal force, the upper body must also move more.

When going uphill, step on the pedals with both feet firmly. After determining the gear, accelerate before climbing. When climbing at a small angle, you must slide your body toward the front of the seat to move your body's center of gravity forward.

When the slope is sharp, you should move the center of gravity to the front as much as possible. Depending on the occasion, you must stand on the pedals and bend your body forward to move the center of gravity to the front wheels.

When you stop while climbing, you must quickly press and hold the front wheel brake, then press the rear wheel brake and parking brake, that is, first brake the front brake, and then the rear brake. The opposite is true when going downhill.

Be sure to slow down when turning to prevent sideslip. At the same time, make good use of the movement of the body's center of gravity to make up for the lack of ATM steering angle, making the exiting action more rapid and smooth.

A standing driving posture can be adopted when bumping, which is more conducive to maintaining the balance of the car body, and can better pass the bad road. This is also the biggest feature of driving ATV.

During the riding process, no special circumstances should avoid sudden stopping or slowing down to prevent emergencies; when overtaking, be sure to turn on the turn signal to ensure that the overtaking is safe and not close to the overtaken vehicle.

Because of the short visual distance when driving at night, you must slow down and turn on the night driving lights to attract the attention of pedestrians and vehicles.

When you feel that the car is abnormal while driving, you must stop and check.