HAISHIDA EMERGENCY EQUIPMENT(ZHEJIANG) CO.,LTD
Home / News / Industry News / How to adjust excavator tracks

How to adjust excavator tracks

Turn the chain link to the middle height of both ends and knock it out. At this time, the crawler shoe can be placed flat and in a line shape, and the excavator walks on one side to the top of the crawler. At this time, an iron bar is needed to "guide" the track shoes to the "right track". Assemble from the drive wheel, place the iron bar under the crawler shoe, and support the machine to rotate the crawler.

Tracked Utility Terrain Vehicle-Fire truck
Tracked Utility Terrain Vehicle-Fire truck
On the basis of the personnel carrier, the fire-fighting vehicle designs a sprinkler device for the rear vehicle, adopts the integrated structure of the carport water tank, and installs a fire-fighting water pump and a high-pressure energy-saving cleaning pump. The fire-fighting water pump can continuously spray water for 15 minutes under high pressure, and the high-pressure energy-saving water pump can continuously spray water for more than 1.5 hours to achieve fire extinguishing operations while driving. 

At this time, a person is required to operate and walk in the cab, while lifting the crawler while turning the crawler forward, passing the upper supporting wheel, walking to The position of the guide wheel, at this time, an object can be placed at the guide wheel, at this time, the two sides of the track are butted, and the live pin shaft can be assembled. This method is also suitable for rubber track assembly. Due to the aging of live pins, it is difficult to beat, and even requires welding and cutting equipment to assemble, so this method is generally not recommended.

When one side of the crawler falls off, to clean up the debris around the crawler, the drive wheel must be docked first, the upper crawler is lifted with a bucket, and the drive wheel is aligned and entered into the crawler. , and align the upper tug, this step is one-third complete. The crawler chain plate often falls off during the work of the excavator, especially for the machine that has been usedfor a long time, and the operator with insufficient operating experience often has no countermeasures, so how to assemble the chain after the chain falls off?

Support the machine to walk on one side to make the track straight, support the machine again and get off the car to adjust the Rubber Tracks, try to make the track roller align with the track after the track has fallen. At this point, two-thirds of the way has been completed. Just use the bucket to gently lift the excavator and use the bucket teeth to hook up the crawler, so that the guide wheel enters the crawler. Then, adjust the crawler to align with the guide wheel, then turn the crawler and add butter. At this time, the crawler has been assembled.

If you want to know us, please contact us!

We always adhere to the quality policy of "Innovation is infinity, to keep improving",adhering to the enterprise tenet of "Veracity,Customer regarded supreme",

  • Company*
  • E-mail*
  • Name*
  • Phone*
  • Message.

Contact Us

*We respect your confidentiality and all information are protected.