What are the technical requirements for rubber track chassis
Rubber tracks series chassis is suitable for small light industry and small construction machinery industry. Light industry is generally agricultural machinery within one to four tons, and construction machinery industry is mainly used in small drilling industry.
The selection of the operating environment is roughly as follows:
The selection of the operating environment is roughly as follows:
(1) The working temperature of the rubber track is usually between -25 and 55'C.
(2) Chemical substances, oil and salt in seawater will accelerate the aging of the track. Please clean the track after use in this environment.
(3) The road surface with sharp protrusions (such as steel bars, stones, etc.) will cause damage to the rubber track.
(4) Curbs, ruts or uneven road surfaces can cause cracks in the pattern on the ground side of the track edge, and such cracks can continue to be used if the wire rope is not damaged.
(4) Curbs, ruts or uneven road surfaces can cause cracks in the pattern on the ground side of the track edge, and such cracks can continue to be used if the wire rope is not damaged.
(5) The gravel road will cause early wear on the rubber surface in contact with the bearing wheel, forming small cracks. In severe cases, water can penetrate, causing the core to fall off and cause the wire to break.
浙ICP备2022029871号